Product Description

LAB SlapBox+™ enclosures are an “all-in-one” solution when adding bass to any aftermarket or factory sound system. Each SlapBox+™ enclosure is manufactured with industrial grade medium density fiberboard (MDF) and wrapped in premium black upholstery. A complimenting class D amplifier is flushed into the side of each enclosure, with variable crossovers and remote bass control. Each enclosure, amp and subwoofer are matched for maximum output and efficiency.

Vented Enclosure

• LAB SlapBox™ 1.40 ft^3 ported MDF subwoofer box
• Designed and optimized for a single 10" Rockford Fosgate® Punch P2 woofer
• 1.40 cu. ft. tuned @ 35Hz
• Constructed of 0.75" CNC-cut high-grade MDF
• High-grade automotive black carpet
• Made in California, U.S.A.

Class-D Amplifier

• Flush-mounted on side of enclosure
• Unbalanced low-level RCA inputs
• High level 10 volt inputs
• Selectable amp turn-on selection with Remote/DC Input/Signal Sense
• 336W RMS @ 2 ohms
• Adjustable level control at 0.2v – 6v
• Bass boost at 0dB – 12dB
• Phase control at 0 – 180 degrees
• Quick connect Power/Remote/Ground Plug
• Variable crossover adjustments at 40Hz – 200Hz
• Visual protection circuit with DC Offset/Short Circuit/Thermal Over Load
• Bass remote with 3.5mm bass remote cable

10" Subwoofer

• Rockford Fosgate 10-Inch Punch P2 Series
• Power Handling: 300W/600W (RMS/Peak)
• Impedance: Dual 4 Ohm
• Kevlar fiber reinforced paper cone woofer
• VAST surround technology for larger surface area
• Dual linear spiders with woven tinsel leads
• Extended pole piece with bumped vented backplate
• 2-1/4" High-temp voice coil with spun-laced Nomex re-inforcement collar
• Protective PVC cover over the powerful magnet
• StampCast basket with integrated spider venting
• Frequency response: 29-250 Hz
• SPL (dB @ 1w/1m): 84 dB
• Top mount depth: 6"
• Cutout diameter: 9-1/8"

Dimensions: 28"W x 13"H x 12"D