LAB SlapBox+™ x JL Audio 10-Inch Active Subwoofer System with Built-In Amplifier in Ported Enclosure
  • LAB SlapBox+™ x JL Audio 10-Inch Active Subwoofer System with Built-In Amplifier in Ported Enclosure

LAB SlapBox+™ x JL Audio 10-Inch "Active" Subwoofer System with Built-In Amplifier in Ported Enclosure
Optimized vented box with integrated class D amp & 10" JL Audio W0v3 subwoofer



FREE Shipping

Availability: Contact us for availability

Product Description

LAB SlapBox+™ enclosures are an “all-in-one” solution when adding bass to any aftermarket or factory sound system. Each SlapBox+™ enclosure is manufactured with industrial grade medium density fiberboard (MDF) and wrapped in premium black upholstery. A complimenting class D amplifier is flushed into the side of each enclosure, with variable crossovers and remote bass control. Each enclosure, amp and subwoofer are matched for maximum output and efficiency.

Vented Enclosure
  • LAB SlapBox™ 1.20 ft^3 ported MDF subwoofer box
  • Designed and optimized for a single 10" JL Audio® W0v3 woofer
  • 1.20 cu. ft. tuned @ 33Hz
  • Constructed of 0.75" CNC-cut high-grade MDF
  • High-grade automotive black carpet
  • Made in California, U.S.A.

Class-D Amplifier
  • Flush-mounted on side of enclosure
  • Unbalanced low-level RCA inputs
  • High level 10 volt inputs
  • Selectable amp turn-on selection with Remote/DC Input/Signal Sense
  • 210W RMS @ 4 ohms
  • Adjustable level control at 0.2v – 6v
  • Bass boost at 0dB – 12dB
  • Phase control at 0 – 180 degrees
  • Quick connect Power/Remote/Ground Plug
  • Variable crossover adjustments at 40Hz – 200Hz
  • Visual protection circuit with DC Offset/Short Circuit/Thermal Over Load
  • Bass remote with 3.5mm bass remote cable

10" Subwoofer
  • JL Audio 10-Inch W0v3 Series
  • Power Handling: 300W RMS
  • Recommended Power Range: 75 - 300 watts
  • Impedance: Single 4-Ohm
  • Mineral-filled, polypropylene cone woofer for excellent durability
  • Large roll surround for generous amounts of excursion
  • Elevated frame cooling brings air directly to the voice coil
  • Designed for compact sealed enclosures or medium-sized ported enclosures
  • Large excursion for louder bass and less distortion
  • DMA Optimized motor system reduces distortion and tight, clean bass
  • Lead wire woven into spider for added strength
  • Metallic silver frame finish
  • 2.0" High temperature voice coil
  • Mounting depth: 4.90"
  • Cutout dimensions: 9.0625"
  • Free Air Resonance (Fs): 32.09Hz
  • Sensitivity: 84.07dB
  • Xmax: 11.4mm
  • Reference Efficiency (no): 0.1500%
  • Frequency response: ~26 ~ 250 Hz

Dimensions: 26"W x 13"H x 12.5"D