• Home
  • JL Audio XD300/1v2 300W XDv2 Series Monoblock Class-D Subwoofer Amplifier w/ High-Speed NexD Switching Design
JL Audio XD300/1v2 300W XDv2 Series Monoblock Class-D Subwoofer Amplifier w/ High-Speed NexD Switching Design
  • JL Audio XD300/1v2 300W XDv2 Series Monoblock Class-D Subwoofer Amplifier w/ High-Speed NexD Switching Design

JL Audio XD300/1v2 300W XDv2 Series Monoblock Class-D Subwoofer Amplifier w/ High-Speed NexD Switching Design

Item:JL-Audio-XD300-1v2

Price:$359.99

FREE Shipping

Tell a Friend

Product Description

    General Features:
  • XDv2 Series Class D Monoblock Amplifier
  • RMS Power Rating @14.4V:
    • 4 ohms: 200 watts x 1 chan.
    • 3 ohms: 250 watts x 1 chan.
    • 2 ohms: 300 watts x 1 chan.
    • 1 ohm: ----------N/A----------
  • RMS Power Rating @12.5V:
    • 4 ohms: 160 watts x 1 chan.
    • 3 ohms: 210 watts x 1 chan.
    • 2 ohms: 270 watts x 1 chan.
    • 1 ohm: ----------N/A----------
  • NexD#8482; High Speed Switching Class D Technology
  • LED power (green), over-current (yellow) and protect (red) indicators
  • Advanced Rollback Protection
  • Dual-Range Differential Balanced Input Section
  • Buffered pass-through preamp RCA outputs
  • Selectable turn-on modes: REM / Offset / Signal
    • +12 V Remote Turn-On: Traditional remote lead wire, from headunit
    • DC Offset-Sensing: On/Off by detecting a very small DC signal (high-level signal only)
    • Signal-Sensing: On/Off by detecting a full-range audio signal at left-channel input (high-level signal only)
  • Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink for extreme heat dissipation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Detented, Calibrated Filter Freq. Potentiometer
  • 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley Crossover
  • Input sensitivity:
    • Low level: 800mV - 8V
    • High level: 200mV - 2V
  • Frequency Response: 10 - 1,000 Hz
  • Total Harmonic Distortion (THD): <1%
  • Signal to Noise Ratio: >100 dB ref. to rated power
  • Signal to Noise Ratio: >80 dB ref. to 1W
  • Damping Factor @4ohms: >120 / 50 Hz
  • Damping Factor @2ohms: >60/ 50 Hz
  • Selectable Low-Pass Filter Slope: 12 dB or 24 dB
  • Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave
  • Fuse Rating: 30A x 1 inline (not supplied)
  • Weight: 3.80 lb
  • Dimensions: 6.85"W x 7.09"L x 2.05"H
  • SKU # 98601
  • 1-Year Warranty